What is AMR, and how do you transcribe it?
AMR (Adaptive Multi-Rate) is an audio format you'll typically find from older phone-call and voice-memo recordings. A speech-optimized codec from mobile telephony — low bitrate, voice-focused.
To turn it into text you don't need to convert anything first — upload the AMR file (or paste a link) and Whipscribe returns a clean transcript with timestamps, exportable to TXT, DOCX, SRT, VTT or JSON. Recordings are transcribed on our own servers and are never used for training.
Where .amr files come from
- Older Android phones. Call recorders and voice recorder apps on older Android phones saved AMR because it is tiny.
- Feature phones and MMS. Voice clips from basic phones and voice messages sent by MMS are AMR.
- WeChat, with a catch. WeChat stores voice messages in files named .amr, but the audio inside is SILK, a different codec. Those need converting first (see below).
Check the file first
- A real AMR file. Starts with the text #!AMR. It uploads as it is.
- A WeChat .amr. Starts with #!SILK_V3 instead. No standard decoder reads SILK, so convert it to MP3 with a SILK decoder, then upload the MP3. The free file inspector tells you which you have.
- AMR inside .3gp. Old phone videos and some recorders put AMR inside a .3gp file. Upload the .3gp.
By the numbers
| AMR (narrowband) | 8 kHz mono, 4.75 to 12.2 kbps: at 12.2 kbps one hour is about 5.5 MB |
|---|---|
| AMR-WB (.awb) | 16 kHz mono, 6.6 to 23.85 kbps |
| Frame | 20 ms; there is no length field, so length comes from the frames |
| Conversion needed | None for AMR and AMR-WB; SILK must be converted |
What WhipScribe does with it
WhipScribe decodes AMR and AMR-WB directly. Narrowband AMR carries only telephone-band sound (up to 4 kHz), so names and quiet speakers come out less reliably than from a wideband recording; nothing can add back what the codec dropped. The opening minutes are a free preview; a pack from $4 for 300 minutes opens the rest.
How this format compares with what everyone else uploads: formats, MB per hour and link sources, measured · real recording lengths.
See also: AMR-WB (.awb) · 3GP phone video · Check what is in a file.
How to transcribe AMR in 3 steps
Add your AMR
Upload the AMR file or paste a link. Every recording starts with a free preview of its opening minutes.
We process it
We read the audio and transcribe the speech on our own servers.
Read & export
Timestamped text in minutes. Export TXT, DOCX, SRT, VTT or JSON.
Frequently asked
How do I transcribe a AMR file?
Upload the file or paste a link. Whipscribe reads the audio and transcribes it. You get a timestamped transcript in minutes, exportable as TXT, DOCX, SRT, VTT or JSON.
Do I need to convert it first?
No — Whipscribe reads AMR directly, so there's no need to convert to MP3 or WAV.
Can I transcribe a WeChat voice message (.amr)?
Not as it is. WeChat's .amr files hold SILK audio, which standard decoders cannot read. Convert it to MP3 with a SILK decoder and upload the MP3. A real AMR file, which starts with #!AMR, uploads directly.
Is AMR good enough to transcribe?
Yes for clear speech. AMR is a speech codec built for phone calls, so a quiet room and one speaker transcribe well; noisy calls lose more words than a wideband recording would.
How much does it cost?
Every recording starts with a free preview of its opening minutes; a pack from $4 (300 minutes) transcribes the rest and opens every export. Credit packs: $4 = 300 min · $18 = 3,000 min · $32 = 6,000 min; credits never expire and there is no seat fee. Workspace is $19 a month for unlimited transcription (300-hour fair-use mark; 100 GB of storage included, then $3 per extra 100 GB a month).
Is my file kept private?
Yes. Recordings are transcribed on our own servers and are never used for training. Delete a recording and its transcript at any time.