Formats · DS2

DS2 to text: DS2 transcription with timestamps.

Upload a DS2 audio file or paste a link and get an accurate, timestamped transcript in minutes. No conversion needed — Whipscribe reads DS2 directly.

What is DS2, and how do you transcribe it?

DS2 (Digital Speech Standard v2) is an audio format you'll typically find from modern dictation hardware. DSS's successor (DSS Pro) with better compression and optional encryption. Whipscribe decodes it directly; for an encrypted file, enter the file's password when you upload it.

To turn it into text you don't need to convert anything first — upload the DS2 file (or paste a link) and Whipscribe returns a clean transcript with timestamps, exportable to TXT, DOCX, SRT, VTT or JSON. Recordings are transcribed on our own servers and are never used for training.

Full nameDigital Speech Standard v2
TypeAudio file
Convert first?No — read directly

Where .ds2 files come from

How to get the file, and the password question

By the numbers

CodecDSS Pro, in QP (quality play, 16 kHz) or SP (standard play) mode
Bitrateabout 28 kbps in QP mode, about 13.7 kbps in SP: roughly 6 to 13 MB an hour
Conversion neededNone; an encrypted file needs its password

What WhipScribe does with it

WhipScribe decodes DS2 and DSS on its own servers with a dedicated dictation decoder, encrypted DS2 included when you give the password. Dictation is usually one clear speaker close to the microphone, which is the easiest audio there is to transcribe. The opening minutes are a free preview; a pack from $4 for 300 minutes opens the rest.

How this format compares with what everyone else uploads: formats, MB per hour and link sources, measured · real recording lengths.

See also: DSS · Dictaphone to text · Check what is in a file.

How to transcribe DS2 in 3 steps

1

Add your DS2

Upload the DS2 file or paste a link. Every recording starts with a free preview of its opening minutes.

2

We process it

We read the audio and transcribe the speech on our own servers.

3

Read & export

Timestamped text in minutes. Export TXT, DOCX, SRT, VTT or JSON.

Frequently asked

How do I transcribe a DS2 file?

Upload the file or paste a link. Whipscribe reads the audio and transcribes it. You get a timestamped transcript in minutes, exportable as TXT, DOCX, SRT, VTT or JSON.

Do I need to convert it first?

No — Whipscribe reads DS2 directly, so there's no need to convert to MP3 or WAV.

Can I transcribe an encrypted DS2 file?

Yes, with its password. Add it with Add content in your WhipScribe Library and type the file's password when asked; it is used only to decode the file. Without the password no one can read the audio.

Do I need Olympus or Philips software to convert DS2?

No. Upload the .ds2 as it is; it is decoded on our servers.

How much does it cost?

Every recording starts with a free preview of its opening minutes; a pack from $4 (300 minutes) transcribes the rest and opens every export. Credit packs: $4 = 300 min · $18 = 3,000 min · $32 = 6,000 min; credits never expire and there is no seat fee. Workspace is $19 a month for unlimited transcription (300-hour fair-use mark; 100 GB of storage included, then $3 per extra 100 GB a month).

Is my file kept private?

Yes. Recordings are transcribed on our own servers and are never used for training. Delete a recording and its transcript at any time.

Transcribe DS2 now.

Every recording starts with a free preview of its opening minutes; a pack from $4 (300 minutes) transcribes the rest and opens every export, and credits never expire.

Transcribe DS2 →

Have a file in this format?

Upload it as it is, no conversion needed: see audio transcription services, a video transcription service for uploads and links and our transcription service with prices and turnaround.