What is FLAC, and how do you transcribe it?
FLAC (Free Lossless Audio Codec) is an audio format you'll typically find from archival recordings and audiophile captures. Lossless compression: full original quality at roughly half the size of WAV.
To turn it into text you don't need to convert anything first — upload the FLAC file (or paste a link) and Whipscribe returns a clean transcript with timestamps, exportable to TXT, DOCX, SRT, VTT or JSON. Recordings are transcribed on our own servers and are never used for training.
Where .flac files come from
- Archives and digitisation. Tape, cassette and reel-to-reel collections are usually digitised to FLAC: lossless, and smaller than WAV.
- Audacity and recorder apps. Audacity exports FLAC, and several Android recorder apps offer it as a lossless setting.
- Music downloads. Stores that sell lossless downloads, Bandcamp among them, deliver FLAC.
Before you upload
- Keep the FLAC. Upload it as it is; there is no need to convert to MP3 or WAV.
- Very high resolution. A 24-bit 96 kHz archive file is fine, but it is not transcribed more accurately than a 16 kHz copy of the same recording (see below). If a file is over 5 GB, a 16-bit 48 kHz FLAC of the same recording is far smaller and loses nothing that matters for speech.
By the numbers
| Compression | lossless; typically half to two-thirds the size of the same WAV |
|---|---|
| 16-bit 44.1 kHz stereo WAV for comparison | 1,411 kbps, about 635 MB an hour |
| Length | exact, from the STREAMINFO header |
| Conversion needed | None |
What WhipScribe does with it
WhipScribe decodes FLAC directly. Every recording, whatever its format, is converted to 16 kHz mono on our servers before speech recognition, which is why extra sample rate or bit depth does not change the transcript. The opening minutes are a free preview; a pack from $4 for 300 minutes opens the rest.
How this format compares with what everyone else uploads: formats, MB per hour and link sources, measured · real recording lengths.
See also: WAV · How big is an hour of audio? · Check what is in a file.
How to transcribe FLAC in 3 steps
Add your FLAC
Upload the FLAC file or paste a link. Every recording starts with a free preview of its opening minutes.
We process it
We read the audio and transcribe the speech on our own servers.
Read & export
Timestamped text in minutes. Export TXT, DOCX, SRT, VTT or JSON.
Frequently asked
How do I transcribe a FLAC file?
Upload the file or paste a link. Whipscribe reads the audio and transcribes it. You get a timestamped transcript in minutes, exportable as TXT, DOCX, SRT, VTT or JSON.
Do I need to convert it first?
No — Whipscribe reads FLAC directly, so there's no need to convert to MP3 or WAV.
Does a FLAC give a more accurate transcript than an MP3?
Only if the MP3 was heavily compressed. Speech recognition here runs on 16 kHz mono audio, so a lossless file and a decent MP3 (64 kbps and up) of the same recording transcribe the same.
How much does it cost?
Every recording starts with a free preview of its opening minutes; a pack from $4 (300 minutes) transcribes the rest and opens every export. Credit packs: $4 = 300 min · $18 = 3,000 min · $32 = 6,000 min; credits never expire and there is no seat fee. Workspace is $19 a month for unlimited transcription (300-hour fair-use mark; 100 GB of storage included, then $3 per extra 100 GB a month).
Is my file kept private?
Yes. Recordings are transcribed on our own servers and are never used for training. Delete a recording and its transcript at any time.