What is GSM, and how do you transcribe it?
GSM (GSM 06.10) is an audio format you'll typically find from legacy telephony and voicemail exports. The original digital-cellphone speech codec — low fidelity, but speech-optimized and fully transcribable.
To turn it into text you don't need to convert anything first — upload the GSM file (or paste a link) and Whipscribe returns a clean transcript with timestamps, exportable to TXT, DOCX, SRT, VTT or JSON. Recordings are transcribed on our own servers and are never used for training.
Where .gsm files come from
- Phone-system prompts. Asterisk and FreePBX ship their voice prompts (press 1, please hold, this call may be recorded) as .gsm files, and custom prompts are often recorded the same way.
- Voicemail. Phone systems that save voicemail in GSM write either raw .gsm or GSM inside a .wav (Asterisk calls that wav49).
Getting the files
- Prompt library. On Asterisk the prompts are under the sounds folder (often /var/lib/asterisk/sounds/<language>). Copy the .gsm files and upload them together: each prompt gets its own transcript, which is the quickest way to find out what every file says.
- Voicemail. Download the message from the phone system's web interface or copy it from the voicemail folder; .gsm and GSM-in-WAV both upload as they are.
By the numbers
| Codec | GSM 06.10 full rate: 8 kHz mono, 13 kbps |
|---|---|
| File layout | no header: 33 bytes for every 20 ms, so 1,650 bytes a second |
| One hour | about 6 MB |
| Measured on WhipScribe | 19 .gsm files transcribed since April 2026, mostly phone-menu prompts of one or two seconds; the longest was 12 minutes |
What WhipScribe does with it
WhipScribe decodes raw GSM and GSM-in-WAV directly. GSM carries telephone-band sound only, which suits short, clearly spoken prompts; a noisy voicemail loses more words than a wideband recording would. The opening minutes of each file are a free preview; a pack from $4 for 300 minutes covers a large prompt library many times over.
How this format compares with what everyone else uploads: formats, MB per hour and link sources, measured · real recording lengths.
See also: Voicemail to text · WAV · Check what is in a file.
How to transcribe GSM in 3 steps
Add your GSM
Upload the GSM file or paste a link. Every recording starts with a free preview of its opening minutes.
We process it
We read the audio and transcribe the speech on our own servers.
Read & export
Timestamped text in minutes. Export TXT, DOCX, SRT, VTT or JSON.
Frequently asked
How do I transcribe a GSM file?
Upload the file or paste a link. Whipscribe reads the audio and transcribes it. You get a timestamped transcript in minutes, exportable as TXT, DOCX, SRT, VTT or JSON.
Do I need to convert it first?
No — Whipscribe reads GSM directly, so there's no need to convert to MP3 or WAV.
Can I transcribe Asterisk or FreePBX sound files?
Yes. Upload the .gsm prompts, several at once if you like; each becomes its own transcript, so you can see what every prompt says without playing them one by one.
How long is a .gsm file?
Raw GSM has no header, so its length is its size divided by 1,650 bytes a second: a 3,300-byte prompt is 2 seconds. The free file inspector does the arithmetic for you.
How much does it cost?
Every recording starts with a free preview of its opening minutes; a pack from $4 (300 minutes) transcribes the rest and opens every export. Credit packs: $4 = 300 min · $18 = 3,000 min · $32 = 6,000 min; credits never expire and there is no seat fee. Workspace is $19 a month for unlimited transcription (300-hour fair-use mark; 100 GB of storage included, then $3 per extra 100 GB a month).
Is my file kept private?
Yes. Recordings are transcribed on our own servers and are never used for training. Delete a recording and its transcript at any time.